15x35x15.9 Bearing
This bearing is made of low-alloy, through-hardened carbon chromium steel for durability and resistance to deformity under heavy loads. The 20-degree contact angle of the balls in relation to the raceways gives the bearing a greater capacity for supporting thrust loads over bearings with a standard contact angle of zero degrees.
Because fewer balls can be inserted per row compared to Single-row Angular Contact ball bearings, a Double-row Angular Contact ball bearing will have less load capacity than an equivalent size/series BACK-TO-BACK set of two Single-row Angular Contact ball bearings.
- 3202 A-2Z Bearings 15x35x15.9 mm Angular Contact Ball Bearing 3202A-2Z
- 4.763 mm
- 336.55 mm
- Super Precision B7001C/P4 HQ1 Size 12X28*8mm bearing
- 4.763 mm
- 336.55 mm
- 32*16.5*15.5cm Non standard mu5206 cylindrical roller bearing
- Shield & Seal & Snap
- 8500 rpm
- L544090/116 Excavator Bearing
- 73 min
- 150 mm
- Angular contact bearing QJF1020M
- 1980
- PLC 512-58
- 5202ZZ Metric size Double row angular contact bearings
- Shield & Seal & Snap
- 8500 rpm
- High Precision bearing 7004 CXGA/P4A
- 73 min
- 150 mm