15x35x15.9 Bearing
This bearing is made of low-alloy, through-hardened carbon chromium steel for durability and resistance to deformity under heavy loads. The 20-degree contact angle of the balls in relation to the raceways gives the bearing a greater capacity for supporting thrust loads over bearings with a standard contact angle of zero degrees.
Because fewer balls can be inserted per row compared to Single-row Angular Contact ball bearings, a Double-row Angular Contact ball bearing will have less load capacity than an equivalent size/series BACK-TO-BACK set of two Single-row Angular Contact ball bearings.
- walking excavator bearing SF4007VPX1
- 1980
- PLC 512-58
- 15x35x15.9 mm electric bicycle angu lar contact ball bearing 3202-BD-2Z-TVH
- 4.763 mm
- 336.55 mm
- 35x72x17 TM207 A13a38 transmission bearing
- 15.875 mm
- 0.794 mm
- QJ310 QJ210 Angular Contact Ball Bearing four point contact ball bearing
- Shield & Seal & Snap
- 8500 rpm
- Ball Screw Support Bearing BS3572 BSB035072 35TAC72B
- 26.5
- Standard
- Angular Contact Ball Bearings7002AC
- 26.5
- Standard
- high quality double row angular contact ball bearing 3305A C3
- Shield & Seal & Snap
- 8500 rpm
- Angular Contact Ball Bearing 7209BE-2RZP Bearing 7209 BE-2RZP
- 15.875 mm
- 0.794 mm